How to Use Chameleon
Using The Chameleon Retractable Hose System
|
PULL.
1. Pull hose handle out and away from the valve.
2. To use the full length of the hose, continue pulling the hose until you feel the end of the hose reach the valve. You will hear and feel the hose end “click” into its locked position.
If using only a partial length of the hose, pull the hose out to the length needed and turn the actuator to the locked position. Turn the system on using the on/off switch at the front side of the valve.
|
NOTE - You do not need to engage the locking actuator if using the entire hose.
|
VACUUM.
Accessories are available for any cleaning job. Just choose your attachment and let the powerful suction do the work
|
RETRACT.
1. If you’re using the locking actuator, turn the lock to the unlocked setting. If you’re using the full length of hose, unlock the hose by grabbing it approximately 8-inches from the valve and rotate the hose to the left until it releases.
2. Partially cover the handle end with hand to retract the hose.
3. Once fully retracted, push the handle end onto the rubber ball and the system will automatically turn off.
|
How to Use the Chameleon Adaptable Hose
Remove the hose from the Chameleon
valve and engage the valve seal.
|
Plug the hose into your standard
central vacuum valve.
|
Vacuum. When finished, store the hose
back into the Chameleon Valve.
|
Updated at 7/25/2024 2:08:37 PM
2322 Views